Ruckus Wireless ZoneFlex 2741 802.11g Guide de l'utilisateur télécharger pdf (Page 17)

Before You Begin

Become Familiar with the Installation Components

The Access Point can be installed in an indoor or outdoor environment, such as an interior

wall or ceiling or the exterior roof overhang of a building or a streetlight pole. Refer to

Figure 8

for the components involved in a typical installation.

Take note of the components that must be installed indoor and outdoor. The PoE injector

and power adapter that are shipped with the Access Point are for indoor use only. Ruckus

Wireless also strongly recommends that you form a drip loop on any cable that is

connected to devices that are installed outdoor (for example, the Access Point and the

Ethernet surge protector).

Figure 8. Typical installation components using both PoE and DC power sources

OUTDOOR

INDOOR

1 Router or switch 8 Ground rod

2 Ethernet (CAT5) cable 9 Drip loop

3 PoE injector 10 Outdoor-rated FTP cable

4 PoE injector power adapter 11 ZoneFlex Outdoor Access Point

Ethernet (CAT5) cable 12 DC cable

Ethernet surge protector 13 DC battery

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 57 58

Pas de commentaire

Ruckus Wireless ZoneFlex 2741 802.11g Guide de l'utilisateur Page 17