Ruckus Wireless ZoneFlex series Guide de l'utilisateur télécharger pdf (Page 62)

Configuring the Access Point

Configuring the Device Settings

6. Under Service Provider Login, change the login information as required:

• Username: Type the name that you want to use for logging into the Web

interface. The default user name is super.

• Current Password: Type the current administrative password. The default

administrative password is sp-admin.

• New Password: Type the new password that you want to use. The password

must consist of six to 32 alphanumeric characters only.

• Confirm Password: Retype the new password to confirm.

7. Click Update Settings to save and apply your changes.

Figure 26. The Configuration > Device page

Enabling the PoE OUT Port for ZoneFlex 7762

Outdoor AP

If you are using the supplied Ruckus Wireless PoE injector for 7762 AP (and power

adapter) to supply power to the AP, you can use the PoE OUT port to supply PoE to

any 802.3af PoE-capable device (for example, another ZoneFlex 7762 AP or an IP-

based surveillance camera). The PoE feature for the PoE OUT port needs to be

enabled from the Web interface.

NOTE: If you use DC power or a PoE injector other than the one supplied with the AP,

the AP will be operational but some features (such as the built-in heater and PoE for

the PoE OUT port) will be unavailable. See Tab le 19 below for more information.

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 107 108

Pas de commentaire

Ruckus Wireless ZoneFlex series Guide de l'utilisateur Page 62